How to Fit Bathroom Wall Panels?
How to Fit Bathroom Wall Panels?
By Wall Panel on May 09, 2023
Bathroom renovation and modernization are incomplete without wall panel installation and that’s the extent of the popularity of bathroom paneling treatment nowadays. Wall shower panels are increasingly becoming popular for cost-effectiveness, DIY installations, longevity, moisture resistance, and many other benefits.
If you’re also looking for a DIY guide to installing your bathroom wall panels efficiently, you’ve come across the most informative piece of writing by Wall Panel. In this post, we’ll take you step-by-step through the paneling treatment process for bathroom walls.
Bathroom Wall Paneling: Follow The Steps For Perfect Installations
Wall panels for bathrooms are moisture-resistant and made of PVC plastic, making them lightweight and easy to install. These are well-liked substitutes for conventional ceramic tiling and are available in a variety of forms and patterns. Below, we’ve explained the wall panel installation procedure in a series of steps for your convenience.
Tools & Materials Required
The necessary tools and materials will make the installation process look easy and simple. Plus, using the right tools and equipment won’t take you much longer to complete this DIY project. No need to mention the chances of damage are reduced significantly by using appropriate supplies.
Here’s what you need to arrange before starting this DIY project;
- Bathroom wall panels
- Panel adhesive
- Measuring tape
- Spirit level
- Panel saw
- Sealant gun
- Safety goggles
- Dust mask
1. Take Wall Measurements & Do Preparations
You can use a tape measure to get the height and width of the walls. Now, mark the center point of each wall with a pencil. Make sure to take repeated measurements because once you cut the panels, there’s no going back.
Next, clean the walls thoroughly to remove any dirt, dust, or debris. If there are any bumps or rough spots on the walls, sand them down to create a smooth surface.
2. Cut The Panels To Size
Following precise wall measurements, you need to cut the panels to size for perfect fittings. For this purpose, it’s best to mark the cut lines first and perform a false installation to ensure whether or not the panels fit right.
When confirmed, you can use a panel saw for cutting them to size. Don’t forget to be precise about the cut line and make sure the panel edges are smooth. For personal safety, you should wear a face mask and safety goggles to avoid inhaling any dust or debris.
3. Adhere The Panels To The Walls
It’s time to apply adhesive to the wall for panel attachments. For this purpose, you can use a trowel to spread the adhesive evenly over the wall, starting from the center and working your way out. Be sure to apply enough adhesive to create a strong bond between the panel and the wall.
4. Attach The Panels To The Walls
Now, it’s time for wall panel installation. Begin by placing the first panel on the wall, lining it up with the center mark. Keep putting some gentle pressure over the wall panel and make sure it’s perfectly aligned with adjacent panels. You need to use spacers between adjacent panels to ensure even spacing.
5. Cut Holes For Fixtures
For fixtures like sinks, toilets, and electrical boards, you need to cut the wall paneling precisely. For this purpose, you have to measure and assess the exact location of the fixture and mark a boundary around it.
Now, using a jigsaw carefully cut the panel into exact dimensions that allow perfect installations of your bathroom fixtures.
6. Finishing & Finalization
Repeat the steps explained above for installing all the bathroom wall panels. To furnish and make your bathroom panels look appealing, you can use trim around the lower-end corners. This will give your bathroom walls a polished and luxurious appearance.
Finalize the paneling treatment of your bathroom walls and take a final review of the project for loose or uneven panels to be fitted.
Some Beneficial Tips & Tricks For DIY Bathroom Wall Paneling
Here are a few hints that may help you complete the installation process efficiently and without any regrets.
- Start fitting the panels from the corner of your bathroom and work your way outwards.
- After fitting 2-3 panels, use a spirit level to ensure the panels are straight and aligned.
- For cutting the panels (around corners), always use a panel cutter.
- Wear safety goggles to ensure personal protection.
- Allow the panel adhesive to completely dry before sealing the edges.
- Always prefer using a sealant with a matching color to the wall panels for an appealing finished look.
The Last Heading
DIY Installing panels on your bathroom walls is a simple and straightforward process that requires a little bit of time and effort. Following the steps explained in this guide with the right tools and materials, you can update and refresh the appearance of your home bathroom without paying any extra to the professionals. Always remember precision and carefulness are the primary elements in DIY jobs.